GOUTERGALLERY

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Properly Start a Wood Burning Stove

Wood stoves are a cozy method to heat a room and save energy. However, they need some level of maintenance.

Many modern wood burning stoves wood stoves comply with EPA emission guidelines. Look for an EPA sticker either under or on the grate to make sure your stove doesn't create a lot of harmful pollutants.

How to start a wood burning fire Fire

The scent and sound of a fire made from wood can be a wonderful feature in any home. However, it is important to know how to properly build a fire in your stove. Incorrect methods can result in a fire that doesn't burn efficiently and creates creosote or smoke. The tips below will assist you in starting an fire that can heat your home with minimal effort and maximum security.

Before you start a fire, you should check the condition of your coals and logs. If they're wet they will choke your fire and hinder proper burning. You may also want to open the flue to let out any ash that has been deposited into the stove.

Start by placing a few small wood burning fireplaces newspaper pieces that are dry into your stove. This will help to spark the tinder and ignite your kindling. Once they start to burn, add another layer of larger pieces of kindling to the top of the pile. This should be done in a crosshatch pattern so there will be air between each piece of wood.

If your wood stove is equipped with an automatic combustion control it will automatically feed air to the fire as it grows. This will help the fire to burn at a steady pace without the need to open the stove's doors to keep it in check.

Do not use too much tinder, as this will cause the fire to burn at a rapid rate and not utilize the fuel efficiently. When you have a good fire and a bed of tinder in your Stove wood Burning, begin the main fire by placing two large logs of the base across the grill. On the top of these base logs put a layer of wood perpendicular to them. This "top-down" method of creating the fireplace will create an effective and long-lasting fire that doesn't engulf larger base logs.

Once the fire is established, close the damper and ensure it stays closed. If you open the damper too early, it could cause the fire to get smothered and not allow for the correct air flow, which can reduce its efficiency.

Adding Wood

Stoves are not only beautiful pieces of home decor they can also help you save money by providing efficient wood heating. They can be used in conjunction with central heating systems or furnace to provide additional heat in large houses. A lot of the stoves that burn clean use a superior combustion principle that differentiates the burning process of volatile compounds from combustible gasses and tar by providing air in two distinct stages. The first stage allows the vaporization of the volatile compounds, while the second step supplies fresh air that has been pre-heated. This improves combustion and reduces smells.

The amount of heat that you can get from a stove will depend on the species and moisture content of the wood, and also the size of the logs. To allow the wood to dry, logs must be stored in a well ventilated space for a few months prior to burning. If the logs contain excessive moisture, they will produce steam that is in essence wasted power.

It is best to add wood to the pile in intervals, not all at once. In addition, adding too much wood at one time causes the temperature inside the firebox to rise, and creates a vortex, which draws smoke and unburnt volatile compounds back into the flame which can reduce the efficiency of your stove.

Avoid burning other combustibles in your stove, like paper or cardboard because they are not wood. They have different physical properties and cannot be burned without causing dangerously high temperatures. You should not burn compressed combustibles like shed wood burner briquettes since they are different in physical and chemical composition from firewood. They are also not type-approved to be burned in wood burning stoves.

If you are installing wood-burning stoves in your home, it's essential to have it installed and tested by a qualified. A certified WETT technician will examine your stove to make sure that it is safe and efficient. They can also make sure that your chimney is functioning properly. These experts can also provide maintenance services to keep your chimney and stove in top condition. They can check the areas accessible to your chimney for leaks, and repair any problems discovered. They will also make sure that all residents of the home understand and adhere to the fire evacuation procedures in the event of an accident.

Adjusting the Damper

A damper controls how much heat escapes to the chimney when you're not using your stove. In addition, it can help you control the fire. If the flue is not open but the damper is not closed enough, the fire will not burn as efficiently and it will release smoke into your living space. You can adjust the damper to ensure the best flames by experimenting with different locations.

Typically, you'll want to keep the damper open enough to let air enter and out of the flue when a fire is burning. This will allow the fire to start and stay lit for many hours. The right opening will also stop the fire from becoming starved of air, and also prevent it from blowing out smoke.

To adjust your damper correctly first, make sure that the fireplace has been preheated and the wood stove is hot. This will ensure that the chimney is warm and has a good draft. After these steps are completed, the wood stove damper can be adjusted.

After the fire has burned for some time, you need to close the damper approximately three quarters of the way. This will stop warm air from the room from venturing into the chimney, while still allowing smoke to escape.

This is the best way to keep your fire burning and prevent it from getting too hot. If you shut the damper too much, it may stop the draft from working, but should it be too open a cold breeze could enter your home.

You can test how much the damper is open by holding your hand near the top of the of the flue pipe. If you can feel a small draft pressing against your hand, it's likely to be in the open position.

The damper setting can vary a little from one stove to another and even between different kinds of wood. You can experiment with different settings to get an idea of the most suitable setting for your stove.

Clean up

After a fire, it is important to clean the stove and flue. This will help to reduce the chance of a chimney fire, which is the primary cause of wood stove related fires in homes. Creosote is a sticky material that builds up on the inside of the stovepipe and can be very dangerous. It is caused by the moisture and wood particles that are not burned that are unable to escape from the fire. It could also be caused by poorly lit fires.

Regular cleaning helps to keep away the buildup of creosote. This can be accomplished by sweeping your chimney at least once a year. It is recommended to have your fireplace and stove professionally cleaned and inspected at least once per year.

It is also a good idea to clean the ash tray and grate regularly. It is a good idea to only use seasoned wood for burning, as this will produce less creosote and ash. Avoid burning cardboard, paper and plastic. They could release chemicals that can be dangerous for the respiratory tract and the atmosphere, which may be released into your home.

The glass that is used on the wood stove has to be cleaned frequently as well. Most newer wood stoves have self-cleaning windows so they don't require as much scrubbing. You can use stove glass cleaners on the glass if you aren't capable of getting the glass as clean as you'd like on your wood stove.

Other ways to maintain your wood stove include lowering the vent when you're not using it and opening doors or windows to allow more airflow. This will ensure that the fire is burning more hot and efficiently. The wood stove will not have to perform as hard to circulate air. It is recommended to not stack logs or leave them in the fire for prolonged periods of time as this could lead to splitting and warping. It is advised to avoid using combustible wood that has been compressed in your wood stove since the paraffin contained within them can melt and flow into the flue which could cause damage.